 |
| | Display Technology and Resolution | | - 3 chip DLP®
- 0.95” DarkChip3™, 12º
- SXGA+ (1400 x 1050) resolution
|
|
| Illumination Technology | | |
|
| Brightness | | - 3000 ANSI lumens @ 500W
- 2100 ANSI lumens @ 350W
|
|
| Brightness Uniformity | | - > 90%, up to 100% with uniform control feature
|
|
| Contrast Ratio | | - Up to 2000:1 full field; 450:1 ANSI minimum
|
|
| Color Temperature Range | | |
|
| Expected Lamp Life (24/7 operation) | | - Up to 4,000 hrs starting @ 350W
- Up to 2,500 hrs @ 500W
|
|
| Lens Type | | - 1.25:1 Low distortion Lens
- 0.73:1 Low distortion Lens
|
|
| Lens Offset | | - Motorized - Horizontal: up to 50%, Vertical: up to 100%
|
|
| Screen Size/Range | | - 0.73:1 lens: 60” to 175” diagonal
- 1.25:1 lens: 60” to 100” diagonal
|
|
| Power Requirements | | - 100 VAC to 240VAC ±10% @ 50/60 Hz
- Power consumption: 879W
- Thermal dissipation: 3000 BTU/hr
- Rating: 10A @ 100V, 5A @ 240V
|
|
| Weight | | - 72 lb (32.1 kg) (excluding optional lens)
- Shipping weight: 115 lb (52 kg)
|
|
| Horizontal/Vertical Frequency | | - Horizontal - 15 kHz to 120 kHz
- Vertical - 23.97 Hz to 150 Hz
|
|
| Pixel Clock | | |
|
| Standard Inputs | | - RGBHV/YPbPr; 5 BNC
- DVI-I: digital/analog RGB/YPbPr (HDCP)
- One composite video, one S-Video
- 2 RS-232 ports and 1 RS-422 port
- On-board ChristieNET™ connectivity (RJ45)
- IR remote control
|
|
| Source Compatibility | | - Christie display wall controllers
- Compatibility with VGA through to QXGA
- Separate, composite sync and sync-on-green compatible
- All current known HDTV formats (1080i, 720p, 576i/p, 480i/p)
- Accepts composite video, S-Video (Y/C), component video (YUV) and HDTV (YPbPr)
|
|
| Advanced Tiling Features | | - Comprehensive Color Adjustment (CCA™) for true color matching
- Brightness Uniformity Control - provides up to 100% uniformity capability for critical applications
- Low distortion tiling lens (sold separately on “DX” models)
|
|
| Color Processing | | - True 10 bit digital color processing
- 13 bit color correction
|
|
| Control/Networking | | - 2 RS-232 ports and 1 RS-422 port
- On-board ChristieNET™ connectivity (RJ45)
- Built-in blacklit keypad (“DX” models only)
- Intuitive, easy to use graphical user interface
- Field upgradeable software via RS-232 network
- IR remote control
- GPIO port
|
|
| Output Compatibility | | - Can operate in native SXGA mode
|
|
| Optional Accessories | | - Dual SD/HD-SDI, DVI
- Wire remote control and RS-422 Two Way Controller
- Remote IR sensor
- Ethernet, RS-232, RS-422 cables
- High frequency remote control
- Serial Digital input module
- Service manual
- KoRE™ 10-bit librarian communication software
|
|
| Operating Environment | | - Temp: 5 to 35ºC (40 to 95ºF)
- Humidity: 20 - 80% non-condensing
- Altitude: 0 - 3000 m (0 to 10,000 ft)
- Storage: -20 - 50ºC, 20-80% RH, NC
|
|
| Reliability | | - MTBF: >30,000 hrs (for major modules)
- Expected life of DMD: 100,000 hours
- Continuous diagnostic monitoring with notification
|
|
| Serviceability | | - Modular design
- MTTR: < 15 minutes
- Lamp change: < 5 minutes
|
|
| Regulatory Approvals | | - IEC60950-1:2001; UL60950-1 1st Edition; CAN/CSA C22.2 No.60950-1-03 1st edition
- EMC - emissions: FCC part 15 and EN55022 (CISPR22) Class A
- EMC - immunity: EN55024
- CE, RoHS, WEEE • CCC, eK, PSE (pending)
- This product conforms to all relevant European directives, safety, health and environmental concerns
|
|
| Warranty | | - 2 years parts and labor (excluding lamp)
- Lamp - prorated
|
|
| Notes on Specifications | | - Contrast ratio may vary depending on brightness mode (maximum specifications shown).
- For UHP lamps, expected lamp life is based on lamp manufacturer’s rating. Typical expectation is that greater than 50% of lamps will reach lamp life rating when operated as specified.
- May not be functional on single-chip models on initial units shipped, but will be available via field upgrade through software when available. Contact your Christie representative for more details.
- Nominal lens throw ratios shown. Actual throw distance may be within 5% of nominal value. Contact your Christie representative for details.
- For best color matching between adjacent displays, it is recommend that White Boost be at 0% setting.
|
| |
Due to constant research, specifications and features are subject to change without notice.
|