 |
| | Digital Light Processing | | - 3-chip 1.25" Darkchip3™ DMD™
|
|
| Resolution | | |
|
| Brightness | | - 8,000 - 25,000 ANSI lumens (+/-10%)
- 90% brightness uniformity across the screen
|
|
| Contrast Ratio | | - High Brightness lens: 1600:1 on/off
- High Contrast lens: 1800:1 on/off
- ANSI Contrast, both lenses: 650:1
- High Contrast optional aperture: 2800:1
|
|
| Input Line Voltage | | - Ballast: 3-phase 200-230 VAC +/- 10% @ 50/60 Hz (max 24A per phase)
- 3-phase 380-415 VAC +/- 10% @ 50/60 Hz (max 12.5A per phase)
- Projection Head: Single-phase 200-240 VAC +/- 10% @ 50/60 Hz
|
|
| Color Processing | | - 10-bit digital processing
|
|
| Scan Rates | | - Horizontal - 15 kHz to 120 kHz
- Vertical - 23.97 Hz to 150 Hz
|
|
| Extraction Fan | | - 8" exhaust port located at the projection head for extraction of hot air; extraction fan is required (min 600 cfm at projector)
|
|
| Lamp | | - Xenon bubble lamp, field replaceable
- High brightness: CDXL60, CDXL45, CDXL30 and CDXL20
- Standard lamps: CXL60, CXL45, CXL30
- Lamp life 600 - 2400 hours or more (depending on wattage lamp used, power level)
|
|
| Power Supply | | - Separate 7kW low-ripple switch mode lamp ballast
|
|
| Inputs, Control and Networking | | - RGBHV/YPbPr: 5 BNC
- DVI-I: digital/analog RGB/YPbPr
- Dual SD/HD-SDI interface module
- 1 composite video and 1 S-Video
- 2 RS-232 ports and 3 RS-422 ports
- On-board ChristieNET™ connectivity (RJ-45)
- IR remote, built-in backlit keypad/status display
|
|
| Lens Mount | | - Manual operation for focus, zoom and horizontal and vertical offset
|
|
| Standard Accessories | | - IR keypad w/batteries
- Line cord
- Dual SD/HD-SDI module
- User manual
|
|
| Optional Accessories | | - Extraction Fan Kit (mandatory)
- High Brightness lenses: 1:1, 1.25-1.45:1, 1.45-1.8:1, 1.8-.2.4:1, 2.2-3.0:1, 3.0-4.3:1, 4.3-6.0:1, 5.5-8.5:1
- High Contrast lenses: 1.25:1.45:1, 1.45-1.8:1, 1.8-2.4:1, 2.2-3.0:1, 3.0-4.3:1, 4.3-6.0:1, 5.5-8.5:1
- Rigging Frame
- 1.26X Anamorphic Lens (can not be used with 1:1 fixed lens)
- Anamorphic lens mount
- ChristieTWIST™ Image Warping and Edge-Blending module
- Dual SD/HD-SDI (additional module), DVI and legacy interface modules
- Wired remote control
- Remote IR sensor
- Ethernet, RS-232 and RS-422 cables
- Service manual
- KoRE™ 10-bit librarian
- Stacking offset extractor duct
|
|
| Weight | | - Projection head (approx): 260 lb (118.2 kg)
Ballast (approx): 110 lb (50 kg)
- Optional rigging frame (approx): 105.4 lb (47.9kg) with Fork Lift Tubes and Castors
|
|
| Dimensions (W x L x H) | | - Projection Head (approx): 25.6" x 49.0" x 20.5" (650mm x 1245mm x 521mm)
- Ballast (approx): 21.3" x 17.3" x 20.9" (541mm x 439mm x 531mm)
- Optional Rigging Frame (approx): 33.5" x 54.9" x 25.7" (851mm x 1395mm x 653mm)
|
|
| Regulatory Approvals | | - UL/CSA/IEC 60950 (3rd edition)
- FCC Class A, CE, CCC
- This product conforms to all relevant European directives, standards, safety, health and environmental concerns
|
|
| Warranty | | - 2 years parts and labor (including light engine)
|
| |
Due to constant research, specifications and features are subject to change without notice.
|