Low energy
Reduced operating expenses
View our current amplifiers.
Ideal for cinema audio applications, the line of Christie® CDA professional amplifiers offer a range of power options to meet a variety of uses. Utilizing an advanced high-speed Class D architecture and high current switch mode power supply, these amplifiers offer high power output and efficiency with very low heat output, fast transient response and stability. The Christie CDA amplifiers are perfectly matched to complement the rest of the Christie Vive Audio solution, providing dynamic and detailed cinema sound.
Features:
- Class D architecture
- Switch mode power supply
- Neutrik XLR / TRS ¼" inputs, balanced +4dB professional level
- Neutrik Speakon high current locking output connectors
- Active, Signal Present, DC Protection and Thermal LED indicators
- Stepped input level controls
2-channel
Class D
Powerfully efficient with faster transient response and lower power
Low heat
Specifications
Rated power
- 2 x 2 ohms:
- 2500W per channel @ 1kHz 0.35% T.H.D. both channels driven
- 2 x 4 ohms:
- 1500W per channel @ 1kHz at <0.1% T.H.D. both channels driven
- 2 x 8 ohms:
- 850W per channel @ 1 kHz at <0.1% T.H.D. both channels driven
- 1 x 2 ohms:
- 2800W @ 1kHz at <0.1% T.H.D.
- 1 x 4 ohms:
- 1700W @ 1kHz at <0.1% T.H.D.
- 1 x 8 ohms:
- 925W @ 1kHz at <0.1% T.H.D.
Minimum load impedance
- 2 ohms
Maximum RMS voltage swing
- 105V
Frequency response
- 20Hz-30kHz; 0dB, -3dB @ 1W
T.H.D.
- 2 x 2 ohms:
- <0.2% @ 2000W per channel from 20Hz-4kHz, decreasing to 1500W @ 20kHz
- 2 x 4 ohms:
- <0.1% @ 1400W per channel from 20Hz-20kHz
- 2 x 8 ohms:
- <0.1% @ 830W per channel from 20Hz-20kHz, increasing to 1000W @ 20kHz
Input CMRR
- >-75dB @ 1kHz
Rated power readings made with BW: <10Hz-22kHz. All power measurements made at 120 VAC. 2 ohm power is time limited by circuit breaker. Input power requirements: 120 VAC, 60Hz, 5A.
* Net weight does not include power cord