LED 1DLP reliability with high performance 2D/3D flexibility

The 1DLP with RGB LED is the first Mirage Series projector to use solid-state LED illumination, providing precise, lifelike, vibrant colors and consistent performance over an estimated 60,000-hours (approximately 6.5 years) life cycle.

Mirage WU-L WUXGA 1DLP 3D projector

Part Number: 125-005106-XX

1DLP WUXGA 600 lumen 3D projector

With the Christie Mirage WU-L DLP® projector you get high resolution, high pixel density, high reliability and continuous system calibration for a cost-effective 2D/3D capable, flexible visualization solution.

With WUXGA resolution, this small footprint projection system offers dual input 3D mode for passive to active conversion that provides the highest performance 3D video content at 120Hz. The Christie Mirage WU-L delivers visually stunning 3D for entertainment, museums and education, scientific research, manufacturing, oil and gas exploration, stereo simulation training and anything in between.

Technology 1DLP®
Resolution 1920 x 1200 WUXGA
Brightness 600 ANSI Lumens
Contrast 10,000:1 dynamic, 1,400:1 FOFO, 450:1 ANSI
Illumination Full spectrum LED (RGB)
Height 8.7" (220 mm)
Width 18.4" (467 mm)
Depth 11.0" (287 mm)
Weight 32 lb (14.6 kg)

LED illumination provides precise, life-like vibrant colors, no color wheel artefacts and reliable performance for years of virtually maintenance-free display.  And, with no restrictions for positioning, you get greater installation flexibility.  Optional lenses, embedded Christie Twist, any orientation projector placement and industry-leading Christie warranties, service and support the Christie Mirage WU-L is the perfect blend of high-performance and ease of use for 3D users.


  • LED illumination with 60,000 hrs MTBF
  • Native WUXGA 1920 x 1200 resolution
  • 1​DLP with solid state illumination engine (no color wheel) and sealed optics
  • Embedded warp and blending capabilities
  • Built-in passive to active converter
  • Unlimited mounting options
  • Dust-sealed light engine
  • Embedded Christie ARRAY LOC™ color and brightness control
  • 600 lumens ANSI ±10% (rated at 75-80% EBU depending on the lens) 
  • 10,000:1 dynamic, 1,400:1 FOFO, 450:1 ANSI.
  • 95% brightness and color uniformity after electronic adjustment
Display Technology and Resolution
  • Revolutionary solid state projector using a single TI Darkchip 3™ DMD with a solid state illumination engine (no color wheel) and sealed optics 
  •  Native 1920 x 1200 (16:10 aspect ratio) WUXGA
  • signals: ​Up to 1920 x 1200 WUXGA (Native 1920 x 1200 recommended)
  • pixel clock: 330MHz max input
  • scan rates: Horizontal: 15-150KHz / Vertical: 23.97-120Hz
Inputs, Control & Networking
  • RS232 in/out
  • RS422 in
  • Ethernet (10/100)
  • USB device
  • GPIO (RS232 9-pin male connector)
  • Dual 7 segment status display
  • Remote control (with optional wired XLR connection)
  • Slot 1-2 standard (populated):  two Dual link DVI-D (330MHz) input cards.  Each has a VGA (165MHz) port
  • Slots 3-4 unpopulated
  • Full bandwidth Analog BNC
  • Dual Link DVI input card (330MHz), VGA (165MHz)
  • Dual SD/HD-SDI
  • Video Decoder*
  • Twin HDMI
  • Two standard Dual Link DVI input cards (330MHz) 
*The Dual link DVI input card has a 330MHz DVI-I connector which can support a single or dual-link DVI, analog and HDCP video signals with proper cables.  There is also an additional 15-pin VGA connector for signals under 165MHz.  Only one input is active on this card at a time.  Two of these cards come standard on the Christie Mirage WU-L
Optical system

Lens mount

  • Mechanical, horizontal and vertical lens shift
  • No shutter required
  • No iris required – user programmable illumination parameters (eliminates the need for a mechanical shutter) 


  • Full spectrum LED (RGB)
  • Illumination package has a MTBF of 60,000 hrs
  • Light module can be changed in 15 minutes and is color and bright level matching in real-time to the projector array 

Christie ArrayLOC™ 

  • Manages the brightness and color levels of all projectors within an array to a common level, in real-time with no additional latency
Lenses* - standard or optional


  • 0.64:1 WUXGA lens
  • 0.75:1 WUXGA lens


  • 1.2-1.6:1 WUXGA lens


  • 0.64:1 lens features ±5% (horizontal) and ±5% (vertical) offset when mounted in landscape orientation
  • 0.75:1 lens features ±80% (horizontal) and ±100% (vertical) offset when mounted in landscape orientation
  • 1.2-1.6:1 lens features ±80% (horizontal) and ±100% (vertical) offset when mounted in landscape orientation

*Each offset is specified with the other at zero. Simultaneous horizontal and vertical offsets may limit the adjustment range of each.

Standard accessories
  • User manual
  • IR remote with hard wired cord
  • Line cord
  • Two Dual Link DVI-D Cards
  • 3D sync cable
Optional accessories
  • Analog RGBHV BNC input card for Analog sources greater than 165MHz
  • Dual link DVI input card*
  • Dual HD-SDI input card
  • Twin HDMI input card
  • User kit (includes manual, IR remote and hard wired cable for the remote)
  • Rugged Motion Platform user kit (purpose-built)  available
Enhanced feature sets
  • Minimum Processing Latency (MPL™)
  • Christie Twist™ II – advanced warping/edge-blending hardware technology integrated directly into the projector, includes warping/blending software
  • Auto set up, power up
  • Menus in 8 languages Multiple channel memories (for recall memory storage)
  • Christie ArrayLOC™ – automatic, continuous management of brightness and color space levels of all projectors in an array to a common level, in real-time
Power requirements
  • operating voltage: 100-240 VAC 50/60Hz
  • operating current: 5.3A
  • dissipation: 1364 BTU/hr (variable, dependent on content)


  • Projector head module + light module (no lens): 8.7 x 18.4 x 11.0" (220 x 467 x 287mm)
  • Electronics module: 16.5 x 5.5 x 6.7" (420 x 140 x 170mm)


  • Projector head module + light module (no lens): 32lb (14.6kg) 
  •  Electronics module: 9.7lbs (4.4kg)

Shipping weight:

  • 52lb (23.6kg)


Operating Environment
  • Noise: 38dBA at 25°C ambient temperature (without electronics module)
  • Operating temperature: 40-95ºF (5-35ºC)
  • Humidity: 20-80% non-condensing
Regulatory Approvals
  • Directives (EC) 2002/95/EC (RoHS) 
  • 2002/96/EC (WEEE) 
  • Regulation (EC) No. 1907/2006 (REACH)
  • CAN/CSA C22.2 No. 60950-1 
  • UL 60950-1 
  • IEC 60950-1 
  •  FCC, Part 15, Subpart B, Class A
  • EN55022/CISPR22 Class A 
  • EN55024 / CISPR24 
  • Certifications marks (check with Christie for latest update): cULus (Canada & US), CE (EU), CCC (China), GoST-R (Russia), KC/KCC (Korea), PSE (Japan), C-Tick (Australia & New Zealand)
  • 2 years parts and labor (inclusive)
  • Contact an authorized Christie representative for full details of our limited warranty

Due to constant research, specifications and features are subject to change without notice.