The most compact 3D digital projector in its class

At 6300 ANSI lumens, and up to 10,000:1 contrast, the Christie Mirage WU7K-M delivers crisp, detailed images, excellent color and brightness uniformity control capability.

Mirage WU7K-M WUXGA 3D 3DLP projector

Part Number: 118-056102-XX

WUXGA 3D 3DLP 6,300 lumen digital projector

The most compact in its class, the Christie Mirage WU7K–M DLP projector provides the high-performance and feature-rich standards you expect – Up to 6,300 ANSI lumens and up to 10,000:1 contrast for crisp, detailed images, excellent color, brightness uniformity control combined with low maintenance.  

Utilizing unique electronics and ultra-high bandwidth processing power, Christie’s technology advancements include Dual Input 3D enabling the display of two discrete 60Hz video channel inputs for high performance 120Hz output. 

Technology 3DLP®
Resolution 1920 x 1200 WUXGA
Brightness 6,300 lumens
Contrast 650:1 ANSI / 10,000:1 FOFO
Illumination Dual Osram® P-VIP® 200W lamps
Lamp life 2000 hours @ 200W , 3000 hours @ 150W
Height 10.2" (259 mm)
Width 19.7" (500 mm)
Depth 22.1" (561 mm)
Weight 55 lb (25 kg)


The Christie Mirage WU7K-M features three modes of 3D input.  It supports native frame rate up to 120Hz at WUXGA resolution over Dual Link DVI-D as well as frame doubled content for maximum source compatibility and high-performance, flicker-free operation.  With the addition of a second input module, the Dual Input 3D mode enables the display of a frame locked passive stereo source for high-performance active stereo at 120Hz without the need of a passive to active converter.

The Mirage WU7K-M offers high efficiency and low cost of ownership featuring long life dual lamps, automatic projector shut-down without a signal and adjustable power for cooling fans.


  • WUXGA resolution (1920 x 1200)
  • Up to 6300 ANSI lumens
  • Up to a full 120Hz native frame rate
  • Standard full 330MHz dual-link DVI-D
  • Variable contrast ratio using electronically adjustable iris for crisp, detailed images - 2500-10,000:1 (full on, full off) / 650:1 ANSI 
  • At maximum brightness the projector draws a maximum power of 870W 
  • Smallest chassis in its class
  • Motorized yellow notch filter 
  • Dual P-VIP lamps (200W) 
  • Embedded Christie Twist™ image warping and edge-blending 
  • Dust-sealed engine, filter-free design 
  • Intelligent Lens System (ILS™) for zoom, focus, horizontal and vertical offset
  • AutoDesk® Revit® model
  • Built-in portrait display capabilities*

*Christie M Series stacking frame is required in portrait orientation.

A full suite of specifically-designed lenses offers flexibility and an embedded Christie Twist™ module enables advanced internal image warping and edge-blending.  Easy to set-up and easy to use, the dual-lamp platform offers greater choice and installation flexibility with a more optimal aspect ratio. 

With the consistency of DLP technology, the Christie Mirage WU7K-M offers reliable, affordable, dual- lamp brightness, in the smallest chassis in its class. Combining additional standard features, an expanded lens suite and industry-leading Christie service, the Christie Mirage WU7K-M provides high performance and ease of use for all 3D/Advanced Visualization users.

More pixels, more performance, more reality.

    • Up to 6,300 ANSI lumens
    • 2,500-10,000:1 FOFO
    • 650:1 ANSI
    • Electronically adjustable iris (manual or dynamic)
    Display technology and resolution
    • 3DLP ​0.96" DMD
    • Native WUXGA 1920 x 1200
    • Frame delay: as little as one frame
    Input signal compatibility
    • Native dual-link DVI-D
    • Analog BNC (optional)
    • Frame-doubled 3D - dual-link DVI, VGA (HDMI, analog BNC & SDI optional)
    Inputs, control & networking
    • RS232 in/out
    • RS422 in
    • Ethernet (10/100)
    • USB device
    • GPIO (RS232 9-pin male connector)
    • Built-in backlit LCD keypad
    • Remote control (with optional wired XLR connection)
    • Slot 1-2 standard (populated):  dual-link DVI-D (330MHz) and VGA (165MHz)
    • Slots 3-4 are available for option cards
    Optional input modules
    • Full bandwidth analog BNC
    • Dual-link DVI input card (330MHz), \- VGA (165MHz)
    • Dual SD/HD-SDI
    • Video decoder
    • Twin HDMI
    Advanced feature set
    • Embedded Christie Twist™ - internal advanced warping and edge-blending
    • LiteLOC™
    • Electronically adjusted iris (manual or dynamic)
    • Dust-sealed, filter-free design
    • Reduced power requirements (as compared to competitive products on the market today) – at maximum brightness the unit only draws 870W; standby power consumption (phantom power draw) is less than 20W
    • Reduced noise levels
    • LCD keypad – active keys are amber to indicate whether function selected will be seen by the audience
    • Motorized yellow notch filter
    • Built-in portrait display capabilities*

    *Christie M Series stacking frame is required in portrait orientation.

    Lens mount
    • Motorized horizontal and vertical lens offset
    • Scheimpflug (tilt) adjustment
    • Built-in light shutter
    • Tool-free lens insertion system
    • All lenses are optional
    • Dual Osram P-VIP​ 200W lamps
    • Lamp life: 2000 hours @ 200W , 3000 hours @ 150W
    Light output control (LITELOC™)
    • Provides constant brightness tracking and monitors lamp output. It also automatically adjusts the power to ensure constant, uniform brightness across the image – on a multiple-projector screen or multiple-screen display.
    Power requirements
    • 100 VAC to 240 VAC @ 50/60 Hz
    • Power consumption: 870W maximum
    • Thermal dissipation: 2971BTU/hr
    • Operating current: 9A @ 100V
    Dimensions (excluding lens)
    • Weight: 55 lb (25 kg) without lens
    • Shipping weight: 87 lb (38 kg)
    • Size: 19.7" W x 22.1" L x 10.2" H (500mm W x 561mm L x 259mm H)
    Standard accessories
    • User manual
    • IR remote
    • Line cord
    • Two dual-link DVI-D cards
    • 3D sync cable
    Optional accessories
    • Coarse dust filter
    • ILS lens adapter kit
    • Stacking frame
    • Dual HD/SDI input card 
    • Twin HDMI input card
    • Dual-link DVI input card
    • Video decoder input card*

    *may not include 3D support

    Operating environment
    • Operating temperature: 40-104°F (5-40°C)
    • Humidity (non-condensing): 20-80% non-condensing
    Regulatory approvals
    • UL/CSA/IEC 60950 (3rd edition)
    • FCC Class A, CE, CCC
    • This product conforms to all relevant European directives, standards, safety, health and environmental concerns
    • RoHS, WEEE
    • 3 years parts and labor (including light engine)

    Due to constant research, specifications and features are subject to change without notice.