High-brightness performance. Light weight design.

1DLP laser projector with the best lumen-to-weight ratio.

Christie D20WU-HS 1DLP laser projector

Part Number: 140-063100-XX

1DLP laser projector. WUXGA resolution. 20,600 ISO lumens

There is no other 1DLP® projector with a better lumen-to-weight ratio. Achieving 20,6​00 lumens and weighing less than 100 lbs.(42 kg), the Christie® D20WU-HS is the lightest and brightest 1DLP laser projector on the market. The powerhouse performance makes the D20WU-HS a viable alternative to similarly bright 3DLP projectors.

The D20WU-HS is not only bright. It produces amazing, true-to-life visuals too. This is thanks to the enhanced color accuracy of Christie’s patented BoldColor Technology and WUXGA resolution.

Compatible with Christie Twist, the D20WU-HS offers users the tools needed to quickly and easily set up and align irregular screens and multi-projector displays.

Its light weight makes it easy to lift, ship and install, especially when used with the optional rigging frame while the omnidirectional capability gives you installation flexibility.

Key features

  • Christie BoldColor Technology - Enhanced color performance and saturation over standard laser projection
  • Long-life laser light source – Up to 20,800 hours of virtually maintenance-free operation
  • Compact and lightweight – Weighs less than 100 lbs. for easy lifting, shipping and setup.
  • Blend and warp – Christie Twist compatibility​ for quick and easy setup of multi-projector displays
  • Fully omnidirectional – Unrestricted design and installation flexibility
  • Lens compatibility – Designed to work with all Christie HS Series lenses for added cost savings and versatility
  • Comprehensive connectivity – Full connectivity for popular formats including 3GSDI for added redundancies
  • Christie Virtual Remote 1DLP – Gives you wireless control from any smartphone or tablet
  • Advanced electronics – Firmware updates take only minutes



  • 20,600 ISO lumens
  • 18,500 ANSI lumens

Color wheel

  • 4 segment (RGBY) - 2X or 3X speed

Contrast (nominal)

  • Full on/off (Christie RealBlack enabled): 2,000,000:1
  • Dynamic contrast: 5000:1
  • Full on/off (Christie RealBlack disabled): 1200:1
  • ANSI 250:1


  • 1 x 0.96” DMD

Native resolution

  • 1920 x 1200 (2,304,000 pixels) 16:10
Illumination system


  • Laser phosphor with Christie BoldColor Technology

Typical lifetime

  • 20,000 hours to 50%
Signal i​nputs


  • HDMI x 2 (one on rear panel, one on bottom of projector, independently selectable)
  • 3GSDI x 1 (BNC)
  • DVI-D x 1 (digital only)
  • HD15 x 1
  • USB x 1 (type A) - image viewer or WiFi dongle (optional)
  • HDBaseT (RJ45 x 1)


  • HDMI 1.4, HDBaseT - frame packed, top/bottom, side-by-side
  • Up to 120Hz output
  • 3D Sync In (BNC) - for genlocking projectors
  • 3D Sync Out (BNC) - for genlocking projectors or controlling emitters


  • HDTV formats VGA through to WUXGA (1920 x 1200)
  • Horizontal and vertical scaling while maintaining aspect ratio, all inputs

Pixel clock

  • 162 MHz

Scan rates

  • Horizontal: 15 kHz to 91 kHz
  • Vertical: 24 Hz to 85 Hz
Signal outputs

Monitor out (loop through)

  • 3GSDI x 1 (BNC)
  • DVI-D x 1 (Digital out)
Control and networking
  • RS232 In
  • Control via HDBaseT
  • Ethernet (10/100) RJ45
  • Built-in backlit keypad
  • Wired remote control (3.5mm stereo) - loop out available for daisy chaining
  • 12VDC trigger at 200mA (ID:2.5mm)


  • IR remote w/ wired remote jack (wire not included)
  • AC line cords for projector head
  • User manual


  • Christie One Rigging Frame
  • Lens adapter for E Series lenses
  • 1DWUSB-BGN (wireless dongle for video and control)
  • HS fog filter covers + filters (order once per projector then only filters refills)
  • HS fog filter refills (1 set)
  • Christie One Mount Plus
  • One Mount Extender Rod
  • One Mount Rigging Kit (used with One Mount, One Mount Plus and/or One Mount Extender Rod)
  • Replacement remote control
Lens mount
  • Boresight adjustable
  • Motorized horizontal and vertical lens offset (memory available)
  • Motorized zoom and focus adjustment (memory available for full ILS lenses)
Lens options


  • 0.84-1.02:1 zoom lens (no zoom/focus memory) - adapted 1.2-1.5:1 E Series lens
  • 1.02-1.36:1 zoom lens (no zoom/focus memory) - adapted 1.5-2.0:1 E Series lens
  • 1.2-1.5:1 zoom lens (full ILS)
  • 1.5-2.0:1 zoom lens (full ILS)
  • 2.0-4.0:1 zoom lens (full ILS)
  • 4.0-7.0:1 zoom lens (full ILS)​
Power requirements

Operating voltage

  • Normal: 200-240VAC @ 60/50 Hz with a 10A fuse

Power consumption

  • Normal mode: 1880W
  • ECO1 mode: 1504W
  • ECO2 mode: 940W

Operating current

  • WLAN mode: <8.0W
  • Standby mode: <0.5W


  • Normal mode: 6653 BTU/hr
Audible noise
  • Typical: 45dB(A)
  • Eco mode: 39dB(A)
Physical specs


  • (L x W x H) 26.65 x 23.46 x 7.99" (677 x 596 x 203mm) without feet

Weight (without lens)

  • 93.7 lb (42.5 kg)

Shipping dimensions

  • (L x W x H) 36.34 x 33.19 x 20.20" (923 x 843 x 513mm)

Shipping weight

  • 119 lb (54 kg)
Operating environment
  • Temp: 0 to 40° C (32 to 104° F)
  • Humidity: 0 - 85% non-condensing

Contact Christie for the timing of certifications:

  • UL/CSA/IEC 60950-1
  • FCC Class A
  • CE
  • FDA
  • CCC
  • KC
  • PSE
  • CU
  • SABS
  • BIS
  • VCCI
  • RCM
  • Ukr
  • TER
  • SASO

This product conforms to all relevant European directives, standards, safety, health and environmental concerns

  • RoHS
  • WEEE
Limited warranty
  • Three years parts and labor on the projector
  • Three years or 15,000 hours parts and labor on the illumination system*
  • Contact an authorized Christie representative for full details of our limited warranty

*Please reference the Christie Standard Limited Warranty document for details.