Premium projection for the small screen

Christie CineLife electronics and RealLaser™ illumination in a compact 2K projector for the small screen cinema
Christie CP2220 Digital Cinema Projector

Christie CP2309-RGB pure laser cinema projector

Part Number: 163-019101-XX

2K, high frame rate, 9,000 lumen RGB pure laser projector

Supercharge your small screen cinema with the Christie® CineLife CP2309-RGB DCI-compliant projector. Featuring patented Christie® RealLaser solid-state illumination and CineLife electronics, the CP2309-RGB delivers 8500 lumens of brightness, greater than 95% of the Rec. 2020 color space, and a 2000:1 contrast ratio for amazing cinematic experiences.

Advanced laser light source

At the core of Christie RealLaser technology are the Multi-Laser Pack Devices (MPD). These compact, robust, solid-state laser banks comprise of individual emitters populated in a matri​x that is specifically tuned for the accurate reproduction of DCI content. With Enhanced Wavelength Diversity (EWD), each MPD features a special configuration of laser diodes making the CP2309-RGB ideal for every type of cinema exhibition, including 3D applications on high-gain silver screens.

All-in-one design

Compact, light and featuring an all-in-one form factor, the CP2309-RGB does not require any external chillers or special pedestals for a seamless installation into any booth. Make the switch to RGB pure laser and benefit from a long lasting and affordable platform that will perform well into the future.

Key features

  • Long-lasting, high-performance light source – Christie RealLaser illumination provides amazing color, high contrast capabilities and is designed to operate for up to 10+ years while maintaining original screen brightness1
  • Color realism – An expansive color gamut (>95% of REC. 2020) that provides richer, deeper, and intense colors without filtering or color correction
  • Compact, all-in-one form factor – No need for external chillers or special pedestals for a seamless installation into any booth
  • Ultra-low maintenance – Fully-sealed optics allows for zero dust-ingress
  • Christie CineLife electronics – Streamlined UX-designed interface for simple playback, scheduling and management of cinema content when used with the Christie IMB-S3
  • Future-proofed – High Frame Rate capable: 2K@120fps
  • Backwards compatibility – Fully-compatible with existing accessories including the Christie Rack Mount Pedestal and existing cinema lenses for additional cost savings

1 Some restrictions may apply. Please contact your authorized Christie sales representative for further information.

  • nominal: up to 9,000 lumens at DCI white (<25C ambient)
  • expected li​fetime: >30,000 hours to 80% brightness (<25C ambient)
Contrast ratio​
  • 2000:1 sequential with standard high brightness lens
Digital micromirror device
  • ​0.69” mDC2K 3-chip DMD DLP Cinema​®
  • 2048x1080 (2K)​
Color gamut
  • Native: ​>95% Rec.​ 2020 coverage
​​Processing electronics
  • Christie® CineLife™​ Series-3 (Series-2 IMB compatible)1
  • HDMI v1.4a x2
  • 16-channel AES (w/ Christie IMB-S3 via RJ45 x2)
  • 2K120 / 4K30 fps (w/Christie IMB-S3)
  • Built-in automation controller
  • 3D Sync Connector (12V 1A powered)2
Lens mount configuration
  • Fully motorized Intelligent Lens System (ILS™)
  • 1.2-1.72:1
  • 1.33-2.1:1
  • 1.62-2.7:1
  • 2.09-3.9:1
Input line voltage
  • Single phase 200-240 VAC
Power input requirements
  • Input A: 200-240 VAC @ 50-60Hz, 9A
  • Input B (UPS input): 100-240VAC @ 50-60Hz, 9A (8A typical @ 120V)
  • Liquid cooled/TEC, self-contained
  • Heat extraction optional
  • Room heat load w/o extraction: 5698 BTU/hr​
Power consumption
  • 1670W @ full load
Laser class
  • Class 1 – Risk Group 3
(Not including lens​)
  • Size: (LxWxH): 42.6x25.0x13.3” (1083x635x337mm)​
  • Weight: 160 lbs (73 kg)
  • ​​Christie IMB-S3 (153-100102-XX)
  • NAS-S3 5.4TB storage (153-101103-XX)
  • Rack mount pedestal (108-416102-XX)
  • Rack mount pedestal adaptor (163-111104-XX)
  • Extraction duct adaptor (163-112105-XX)​

1 Supports Dolby IMS2000/IMS3000 and GDC SX-3000/SX-4000
2 Supports most conventional 3D systems except “color-separation” based 3D (i.e. 6P). Visit the website for more information.

Due to constant research, specifications and features are subject to change without notice.