The World's Brightest Stereoscopic 3D Projector!

Christie's Mirage 10000 offers the world's brightest stereoscopic single projector solution for power walls, simulation and entertainment environments.

Christie Mirage 10000 Digital Projector

Part Number: 38-DMD017-XX

XGA 10,000 LUMEN ACTIVE STEREOSCOPIC PROJECTOR

Christie's Mirage 10000 offers the world's brightest stereoscopic single projector solution for power walls, simulation and entertainment environments. The Mirage 10000 can provide both active or passive stereoscopic display at a much lower maintenance cost that typical film or analog 3D solutions today.

       
 
Technology 3-chip DLP
Resolution True XGA 1024 x 768
Brightness 10,000 Lumens
Contrast 300:1 ANSI, 500:1 full field
Illumination 1900W Xenon Lamp
Lamp Life Over 1,000 hours lifetime
Height 16.0" (40.6 cm)
Width 29.0" (73.7 cm)
Depth 54.0" (137.2 cm)
Weight 220 lbs (100 kg)
 
       

Based on XGA 3-chip DLP™ technology, the Mirage 10000 delivers an unprecedented 10000 ANSI lumens brightness at 1024 x 768 resolution. Unlike 35mm or 70mm projection technology that requires two film projectors or other stacked analog projectors to achieve 3D effect, the Mirage 10000 is fully digital and requires only one projector for cost efficient high brightness 3D stereoscopic images.

Features

  • Single Projector Active Stereoscopic Solution
  • 3-Chip DMD™ Optical System
  • 10,000 ANSI lumens
  • XGA resolution
  • 1900W Xenon illumination system
  • 300:1 ANSI contrast ratio
  • Wide array of optional lenses
  • ILS™ (Intelligent Lens System)
  • DIA™ (Dark Interval Adjustment)

Uses

  • Immersive Environments
  • Virtual Reality
  • 3D Computer-aided Design
  • Vis Sim
  • Simulation
  • 3D Entertainment
       
 
Brightness
  • Over 10000 ANSI lumens +/- 10%
  • Over 90% brightness uniformity
Contrast Ratio
  • 300:1 ANSI, 500:1 full field
Resolution
  • 1024x768 true resolution with resizing capabilities to scale down from 1280x1024 and scale up from 640x480
  • 16.7 million displayable colors
  • 3 - DMD™ Optical System (SLIC™)
Horizontal Frequency
  • 15kHz to 120kHz
Vertical Frequency
  • 24Hz to 120Hz
Dot Clock
  • 160 MHz
Field Interchangeable Optional Lenses
  • Fixed short throw lens: 0.8:1
  • Zoom lenses: 1.5-2.5:1, 2.5-4:1, 4-7:1
  • Vertical lens offset: Up to 100% for off-access projection
  • Horizontal lens offset: Up to 75%
  • Intelligent Lens Systems (ILS™); automatic adjustment of zoom (with zoom collar), focus, vertical and horizontal lens offset
  • Lens mount tilt adjustment
  • Built-in light shutter
  • Screen size 72" to 480" (1.8 m - 12.2 m) diagonal image size (lens dependent)
Dynamic Scaling
  • Resizing processing for computers and workstations up to 1600 x 1200 resolution
  • Independent horizontal and vertical image size adjustment for graphics and video
Inputs
  • Input 1: Analog RGB 5 BNC for RGBHV, YprPb, YcbCr and YUV
  • Input 2: Optional plug-in input modules
  • Separate, composite sync and sync-on-green compatible
  • HDTV Tri level sync compatible for all known
  • HDTV formats
Stereoscopic Source Compatibility
  • Active stereo XGA with vertical refresh rates up to 120Hz, with one field delay, without frame dropping
  • In 3D mode, inputs must be in RGB
Enhanced Feature Set
  • Variable lamp power (1.4 - 1.9kW on lamp)
  • Intuitive onscreen display (OSD)
  • Service functions can be password protected
  • Multiple language support
  • 100 channel memories
  • Dark Interval Adjustment (DIA™)
  • Auto Set-up feature
Control/Networking
  • Auto power-up
  • RS232 and RS422 communication port
  • IR Remote keypad
  • Front and rear IR receiver
  • Optional 2-way controller RS422
  • Built-in backlit keypad
Lamp Specifications
  • 1900W Xenon® Lamp
  • Color temperature range 3200K to 9300K
  • Over 1000 hours of lamp life
  • User replaceable lamp
Power Requirements
  • Voltage range: AC 220 - 240V +/- 10%
  • Line frequency: 50 - 60 Hz nominal
  • Power consumption: 2800 W maximum
  • In rush current rating: 60A maximum
  • Current rating: 14 Amps maximum at 200VAC
Environmental
  • Operating temperature: 0 - 35° C
  • Operating humidity: 20 - 80% non-condensing
Diagnostics
  • Built-in diagnostics LCD display indicates operational status and error messages
  • Power and status LEDs
  • Full diagnostics through RS232 9-pin D connector
Size and Weight
  • 73.7 cm W x 137.2 cm L x 40.6 cm H
  • 220 lbs. (100 kg)
  • 29" W x 54" L x 16" H
Standard Accessories
  • IR (infrared) remote keypad - includes batteries
  • User's manual
  • 4 eyebolts for hoisting: 1/2"-13 x 1 1/2"
Optional Accessories
  • Wired Two-Way remote controller (RS422) with
  • LCD display
  • Remote IR sensor
  • Replacement lamp kit
  • Multi-standard video decoder (NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM)
  • DVI/DFP module
  • Digital HDTV module (SMPTE 292)
  • Service manual
  • Vista compatible analog input modules
  • Compatible with selected third party switchers
  • Librarian communication software
  • Serial Digital Input (SMPTE 259M/CCIR 601)
  • 10-bit ADP (Advanced Digital Processing) used in non-stereo mode
  • Arbitrary Gamma Table Software
  • Wired remote backlit keypad
  • Optional sound reduction kits
Regulatory Approvals
  • Safety: CSA C22.2 No. 950, UL 1950, EN609050 European Norm "Safety of Information Technology Equipment"
  • 47CFR 2&15 (FCC) Class A - US - Conducted and Radiated Emissions Standards
  • CRC 1374 (DOC) Class A - Canadian - Conducted and Radiated Emissions Standards
  • Emissions per EN50081-1. Immunity per EN50082-1.
  • ESD Susceptibility: EN61000-4-3 Level 3
  • Radiated Susceptibility: EN61000-4-3 Level 3
  • EFT/Burst: EN61000-4-4 Level 4
  • Input transcient protection: EN61000-4-5 Level 3
Warranty
  • Product warranty: 15 months parts and labor (excluding lamp)
  • Accessories: one year
 
       

Due to constant research, specifications and features are subject to change without notice.