Solid-state technology powering high-performance video walls. Zero-maintenance design.

The Christie 70” HD video wall display cubes are an integral building block in a high-performance video wall display system. Featuring an improved design, the Christie 70” HD video wall display cube is an excellent option for installations that need true HD LED display cubes in a 70” 16:9 form factor.

70” HD video wall display cube

Part Number: 122-004105-XX

Maximize your efficiency and response time during critical situations.

You expect quality. You need a solution that works reliably 24/7, no questions asked. Rear-projection video walls are the best way to quickly and effectively share large amounts of real-time information used in monitoring and control room applications.

For more than 30 years, Christie has been manufacturing high-performance video wall display systems that can positively affect our everyday lives. Christie display cubes are designed for 24/7 data-monitoring environments. We offer a wide range of resolutions, brightness and display sizes.

Features

  • Excellent for installations that need true HD LED display cubes in an 70” 16:9 form factor
  • Only 1 mm gaps between screens
  • Superior reliability and performance from HD DLP® based display technology
  • LED based illumination for excellent color performance – vivid, wide gamut
  • No lamps to replace
  • Solid state- no moving parts, no consumables
  • Low maintenance (zero maintenance design)
  • No color wheels
  • Color and brightness across the video wall automatically stays matched over time – no downtime due to recalibration requirements
  • Less chance of failures or down-time during mission-critical situations
  • Fast servicing for minimal down-time upon failure
       
 
Product make-up1
  • Cube: CC70-3501
  • Projection engine: RPMHD-LED01
  • Screen options: SC70-XP01
Imaging technology
  • Imaging: 1-chip DLP®, Dark Chip
  • Native resolution: HD (1920 x 1080)
  • Illumination: Light Emitting Diodes (Red, Green, Blue)
Pixel density
  • Pitch: 31.4 pixels per linear inch
Screen
  • Gap: 1mm nominal gap between adjacent images/screens
  • Types: wide angle cross prism
Inputs
  • Standard: Digital DVI-I with analog VGA
  • Scan rates: Horizontal: 15-120kHz , Vertical: 23.97-150Hz , Pixel clock: 165 MHz
  • Expansion: 3 input module slots available
  • Optional modules: VGA, Digital (DVI), Analog (RGB), dual SDI/HDSI, twin HDMI
  • Compatibility: compatible with Christie TVC Series video wall controllers or other input sources from VGA to QXGA as well as standard HD formats
Illumination
  • Technology: LED (RGB)
  • LED life rating2: >60,000 hrs
Color
  • Temperature range: 3200-9300K
  • Gamut: beyond 100% EBU
  • Adjustment and control: Screen to Screen: ArrayLOC™ automatic brightness & color management
  • Individual: Comprehensive Color Adjustment (CCA™)
Optical
  • Lens types: 0.69:1 low distortion, zero offset, with field curvature correction
  • Brightness uniformity: brightness uniformity control provides up to 100% uniformity capability for critical applications
  • Contrast ratio: >100,000:1 (shutter mode); 1400:1 (full field)
Control/networking

Ports/controls:

  • 2 RS-232 ports and 1 RS-422 port
  • Field upgradable software via RS-232 network or Ethernet
  • IR remote control
  • GPIO port
  • On-board ChristieNET™ connectivity (RJ45)
Upgradability
  • Web-based user interface for field upgrade of firmware
Optional Accessories
  • Inputs: see input option modules above
  • Other: wired remote control, pedestal
Physical characteristics

Dimensions

  • Depth: 35"
  • See included line drawings for additional dimensions

Weight (approx.)

  • Cube enclosure: 139lbs (63kg)
  • Screen (XPS type): 81lbs (37kg)
  • Light engine: 60lbs (27kg)

Shipping weight (approx.)

  • Cube enclosure: 196.5lbs (89kg)
  • Screen (XPS type): 119lbs (54kg)
  • Light engine: 68lbs (31kg)

Stack-ability

  • 3 units high (call if requirements is >3 high)

Service type

  • Rear access
Environment

Cube

  • Operating temperature3: 40-95°F (5-35°C)
  • Non-operating temperature: -4-122°F (-20-50°C)
  • Humidity: 20-80% non-condensing • Storage: 35-65% non-condensing
  • Altitude: 0-3000m (0-10,000ft)

Screens

  • Operating temperature3: 63-88°F (17-31°C)
  • Non-operating temperature: -4-95°F (-20-35°C)
  • Humidity: 40-60% non-condensing
  • Altitude: 0-3000m (0-10,000ft) 
Power rating (projection engine)
  • Voltage: 100-240 VAC 50/60Hz
  • Current: 4.8A
  • Consumption: rating: 370W
  • Dissipation (maximum): 1263 BTU/hr
Reliability and serviceability

MTBF

  • >50,000 hrs MTBF for all major modules

MTTR

  • <15 minutes with modular design • <5 minutes for lamp
Regulatory (projection engine)
  • Directives: (EC) 2002/95/EC (RoHS)
  • 2002/96/EC (WEEE)
  • Regulation (EC) No. 1907/2006 (REACH)
  • CAN/CSA C22.2 No. 60950-1
  • UL 60950-1
  • IEC 60950-1
  • FCC, Part 15, Subpart B, Class A
  • EN55022/CISPR22 Class A
  • EN55024/CISPR24
  • Certifications marks (check with Christie Digital Systems for latest update)
  • cULus (Canada & US)
  • CE (EU)
  • CCC (China)
  • GoST-R (Russia)
  • KC (Korea)
  • PSE (Japan)
  • C-Tick (Australia & New Zealand)
Calibration
  • All projection units are factory calibrated for best color performance
Limited warranty
  • Two years parts and labor

Contact an authorized Christie representative for full details of our limited warranty

Addtional features and benefits
  • Integrated 6-axis adjustment system for precise geometry alignment
  • Full-function remote keypad with easy-to-use menu system
  • Multiple set-up memories to manage multiple input sources
  • Picture-in-Picture capability
  • Control and status monitoring over IP
  • Extensive scaling capability
  • Input spanning across multiple screens (up to 3x3)
    3 x Redundant cooling fans
  • Innovative water-filled,sealed heat pipe cooling system (maintenance free, no motorized pumps, hazardous chemicals or concern of leakage)
 
       

 

1 Cube, light engine and screen are sold separately.
2 LED lifetime is based on expected useful life to 50% brightness.
3 For best long-term performance and reliability, Christie recommends that all electronic equipment, such as rear screen projection systems, are regularly operated at temperatures below 77°F (25°C).