Cabling View

Cabling Legend: MicroTile  ECU 
† Cabling layout is for guidance only and must be reviewed by a trained individual. Canvases with over 200 tiles or over 16 ECUs may require multiple master ECUs.

Canvas View

Slice Legend: Insert Slice  – – – – Remove Slice  ———
Canvas Legend: Insert Tile  ——— Remove Tile  ———

Cabling Options

View

Origin

Strategy

ECU Rack Position

Cabling List

ECUs
Source HSSL1 HSSL2
MicroTiles
Source Top Bottom
ECUs
Source HSSL1 HSSL2
MicroTiles
Source Top Bottom

Dimensions

Miscellaneous

MicroTiles Energy Consumption

Typical operating power consumption is estimated below at maximum calibrated brightness. When designing a cooling or electrical system, use the maximum design limit of 110W per tile to ensure a reasonable safety factor.

Units

MicroTiles Weight

Complementary Products

ECU Subarrays

Each MicroTiles external control unit (ECU) provides a DVI input to the canvas. To increase the Maximum Source Resolution for the canvas, increase the number of ECUs.

Maximum Source Resolution

Edit the configuration of ECU subarrays

The maximum source resolution is based on a recommended maximum source of 150 MHz per ECU, and a frame rate of 60 Hz.

Tiles Resolution
Width Height Width Height
Tiles Resolution

Hardware

MicroTiles

MicroTiles Screen

Y-Cord Kit

Include

Air Filter

Include

Center Feet

End Feet

Wall Mounts

JumpStart

Model

Rack Mount Kit

Include

Bill of Materials

Note: All technical calculations and outputs produced by the software are intended for general guidance only, and should not be used exclusively as the basis of a project design. All installations of Christie products should be planned and specified in accordance with the product's technical documentation, including the User Manual, and with the limitations described therein, and should be inspected and approved by a qualified and trained professional.

Specifications

Note: All technical calculations and outputs produced by the software are intended for general guidance only, and should not be used exclusively as the basis of a project design. All installations of Christie products should be planned and specified in accordance with the product's technical documentation, including the User Manual, and with the limitations described therein, and should be inspected and approved by a qualified and trained professional.

Performance specifications are typical. Due to constant research, specifications are subject to change without notice.

If brightness and color matching is disabled, higher brightness and power levels are achievable, up to 110 watts per tile. When designing a cooling or electrical system, this maximum design limit of 110W should be used to ensure a reasonable safety factor. Refer to the MicroTiles Specification and Application Guide for more details.

MicroTiles Specifications

Cabling Diagram

Note: All technical calculations and outputs produced by the software are intended for general guidance only, and should not be used exclusively as the basis of a project design. All installations of Christie products should be planned and specified in accordance with the product's technical documentation, including the User Manual, and with the limitations described therein, and should be inspected and approved by a qualified and trained professional.

Cabling layout is for guidance only and must be reviewed by a trained individual. Canvases with over 200 tiles or over 16 ECUs may require multiple master ECUs.

MicroTile    ECU