具有前所未有的稳定性和图像质量的模拟仿真投影机

科视Christie Matrix SIM模拟仿真投影系统专为长寿命,稳定性,可靠性而设计,且采用了降低整体维护费用的技术优势。

Matrix SIM LED 模拟仿真投影机

Part Number: 125-001124-XX

WUXGA 600 ANSI流明LED照明模拟仿真投影机

科视Christie Matrix SIM基于与科视Christie Matrix StIM同样的稳定长效RGB-LED照明平台可为各种没有夜视镜模拟要求的商用航行和其他训练应用提供近乎免维护的选择。

科视Christie Matrix SIM在民航方面现在也大有市场,显示方案符合美国联邦航空管理局的标准,只需较小的维护费用,运行成本低廉,并具有实时自动校准和低时延的特性。科视Christie Matrix SIM模拟投影系统被成功地应用到了商用模拟器上,通过了美国航空管理局关于完全无限制训练的资格认证要求。

如果训练器停机,取决于平均无故障时间(MTTR),时间的损失直接代表着更少的训练时间、更低的训练质量和更高的维护成本。科视Christie Matrix SIM以典型运行7-10年的使用寿命提供了几乎免维护显示。

Matrix SIM中的LED照明和DLP® 技术的组合有着诸多优势带来前所未有的图像质量、稳定性、可靠性和长效的显示寿命此外,还有超宽的色域,出色的色彩饱和度,以及更高的灵活性,完全可以满足色彩空间的应用需求,以增强图像生成器的生成能力,使其产生比传统灯泡投影机更真实的图像同时,由于LEDDLP®的高带宽性能可以理想地互补和相辅相成,使静态和动态图像的保真度保持更高的水平

       
 
技术 单片DLP®
分辨率 1920 x 1200 WUXGA
亮度 600流明
对比度

10000:1动态对比度(LED控制下);
无需机械光圈

照明 RGB LED照明套装
高度 170 mm (6.7")
宽度 140 mm (5.5")
长度 420 mm (16.5")
重量 4.4 kg (9.7 lb)
 
       

Matrix SIM模拟仿真投影系统是一种可行的显示解决方案,满足美国联邦航空局(FAA)民航完全不受限制训练的标准。

科视Christie Matrix SIM是一款智能显--利用科视Christie ArrayLOC™技术,实时地自动调整色彩和亮度水平,并提供坚如磐石的系统稳定性。结合其寿命长的特点,这大大减少维护工作和拥有成本,从而带来更多几乎免维护的正常运行时间和更多的培训时间。

功能特性

  • 集成、超快的LED发光可以使系统发光装置保持50000小时的平均无故障时间
  • 视觉显示解决方案符合美国联邦航空局标准,完全不受限制的模拟训
  • ArrayLOC™——可以实时持续管理矩阵中所有投影机的亮度和色彩空间无额外的延时
  • 无耗材——没有灯泡与传统的有灯泡投影机相比使用寿命更长更可靠拥有成本更低
  • 采用单 DMD™ 固态技术——提供无与伦比的画面可靠性无滤镜无色轮可靠性高
  • 色彩范围更广——可以模拟更动态逼真的培训环境
  • 安装选项无限制——对灯泡没有限制可进行任何方向的安装
  • 模块化的结构——外观小巧紧凑
       
 
Brightness:
  • 600 lumens ANSI +/- 10% (rated at 75-80% EBU depending on the lens)
Contrast:
  • 10,000:1 dynamic contrast
  • No mechanical iris required
Uniformity:
  • 95% brightness and color uniformity after electronic adjustment
Display Technology Type:
  • Revolutionary solid state projector using a single TI Darkchip 3™ DMD with a solid state illumination engine (no color wheel) and sealed optics.
Native Resolution:
  • Native 1920 x 1200 (WUXGA)(16:10 aspect ratio)
Inputs:
  • Signals: Up to 1920 x 1200 WUXGA recommended
Scan Rates:
  • Vertical – 23.97 Hz to 60 Hz
Inputs, Control and Networking:
  • DVI-D and HD15 analog standard
  • On-board Ethernet control capabilities(ChristieNET™ functionality)
  • Additional Ethernet connections for ArrayLOC™ network
  • IR/wired remote control as part of optional user kit
  • 2 – RS-232 ports and 1 RS-422 port
Lens Mount:
  • Mechanical, horizontal and vertical lens shift
  • No shutter required
  • No iris required - user programmable illumination parameters(eliminates the need for a mechanical shutter)
Illumination:
  • LED illumination package has an MTBF of 60,000 hrs
  • Light module can be changed in 15 minutes and is color and bright level matching in real-time to the projector array
ArrayLOC™:
  • Manages the brightness and color levels of all projectors within an array to a common level, in real time with no additional latency
Lenses: Fixed and Zoom
  • 0.64:1 WUXGA fixed lens and 0.75:1 fixed optimized lens.
  • 1.2-1.6:1 WUXGA zoom lens
Lenses: Offsets
  • 0.64:1 lens features ±5% (horizontal) and ±5% (vertical) offset when mounted in landscape orientation
  • 0.75:1 lens features ±75% (horizontal) and ±100% (vertical) offset when mounted in landscape orientation
  • 1.2-1.6:1 lens features ±75% (horizontal) and ±100% (vertical) offset when mounted in landscape orientation
Standard Accessories:
  • Line Cord
Optional Accessories:
  • Analog RGBHV input card
  • DVI-I input card
  • Remote IR sensor
  • User kit (includes manual, IR remote)
  • Rugged Motion Platform user kit (purpose-built)
Enhanced feature sets:
  • Minimum Processing Latency (MPL™) • Christie Twist II – Advanced warping/edge-blending hardware technology integrated directly into the projector,
    includes warping/blending software 
  • Auto set-up, power up 
  • Menus in 5 languages • AccuFrame adjustable to <6ms 
  • Multiple channel memories (for recall memory storage) 
  • Christie ArrayLOC™ – automatic, continuous management of brightness and color space levels of all projectors in the array to a common level, in real-time
Power Requirements:
  • Operating Voltage: 100-240 VAC @ 50/60 Hz
  • Operating Current: 5.3A
  • Power: 400W maximum (variable, dependant on content)
  • Dissipation: 1364 BTU/hr (max)
Dimensions: Projector Head Module + Light Module (no lens)
  • Size: 8.7 x 18.4 x 11.0" (220 x 467 x 287mm)
  • Weight: 32 lb (14.6 kg)
  • Shipping Weight: 52 lb (23.6 kg)
Dimensions: Electronics Module
  • Size: 16.5 x 5.5 x 6.7" (420 x 140 x 170mm)
  • Weight: 9.7 lb (4.4 kg)
  • Shipping Weight: 52 lb (23.6 kg)
Operating Environment:
  • 38dBA at 25°C ambient temperature (without electronics module)
  • Operating Temperature: 40-95°F (5-35°C)
  • Humidity: 20-80% non-condensing
Regulatory Approvals:
  • Directives (EC) 2002/95/EC (RoHS) 
  • 2002/96/EC (WEEE) 
  • Regulation (EC) No. 1907/2006 (REACH)
  • CAN/CSA C22.2 No. 60950-1
  • UL 60950-1 
  • IEC 60950-1 
  • FCC, Part 15, Subpart B, Class A
  • EN55022/CISPR22 Class A 
  • EN55024 / CISPR24
  • Certifications marks (check with Christie for latest update): cULus (Canada & US), CE (EU), CCC (China), GoST-R (Russia),KC/KCC (Korea), PSE (Japan), C-Tick (Australia & New Zealand)
Warranty:
  • 2 years parts and labor
  • Contact an authorized Christie representative for full details of our limited warranty
 
       

Due to constant research, specifications and features are subject to change without notice.