This replacement 300W UHP (Ultra High Performance) is a metal halide lamp manufactured by Philips, provided to you by Christie.
This lamp is user replaceable (following Christie’s lamp replacement procedures located in the resources tab of this webpage or in the resources section of one of the projectors’ webpage listed below) and will last up to 1500 hours (typical).
The benefits of using a UHP lamp in this Christie projector is that is allows for a smaller and lighter projector (because the power supply is smaller and lighter), a cooler running, quieter, and less expensive-to-operate projector (because of the lower wattage) and a longer lamp life (because the stresses on the lamp are reduced).
Specifications
|
||||||
Due to constant research, specifications and features are subject to change without notice.
Christie LS+58 and LX66 Lamp and Filter Replacement Instructions
Apr 20, 2010 | PDF: 267 KB
This PDF document contains detailed instructions on how to replace the lamp and/or filters in the Christie projectors and/or display equipment listed below. A lamp should be replaced when it reaches its end of life or sooner if a noticeable degradation in brightness occurs. The filters of your Christie projector should be replaced whenever the lamp is replaced. If you are working in an extremely dusty environment you may want to replace the filters sooner. Use only the Christie approved Lamp and Filter Replacement Kit specified for your projector model. Contact our technical support center or your Christie Sales Manager if you require more information or assistance.
