Employing the same ribbon driver technology present in our screen channel loudspeakers, Christie's line source surround loudspeakers feature a unique integrated waveguide design to provide enhanced clarity, and reduced distortion. In addition, the inclusion of the ribbon driver provides ultra-fast transient response. Our line array surround loudspeakers offer the same benefits while also providing perfect timbre matching and extremely uniform coverage for seamless listening experience throughout the auditorium.
Note: Safety cables are recommended any time a loudspeaker will be positioned overhead in an auditorium.
Features:
- Unique integrated waveguide design for very wide, controlled dispersion patterns
- Ribbon driver and paper/Kevlar composite cone drivers
- Dramatically higher RMS to peak max SPL ratio than compression driver systems
- Ideal for use as surround channel loudspeaker, with or without bass management
- Heavy duty marine grade plywood cabinet with integrated mounting points
Specifications
System type
- Two-way, passive, ported enclosure
Driver components
- HF: 3" high output ribbon driver with Kapton® diaphragm and Neodymium magnets
- LF: 10" paper/Kevlar composite cone driver with 64mm diameter voice coil
Crossover
- 2-way, passive @ 2.2kHz
Frequency response*
- 70Hz-20kHz @ -6dB
Maximum SPL**
- 122dB continuous, 133dB peak
System coverage***
- 100° horizontal dispersion
- 50° vertical dispersion
*Measured at 2m on tweeter axis in simulated free field conditions. Near field measurements were used for low-frequency data. Sensitivity is calculated based on measured SPL response averaged in 200Hz-5kHz range.
**IEC refers to IEC 60268-5 standard. Max SPL calculated based on sensitivity and power handling. IEC short-term power tested using IEC pink noise with 9dB crest factor. The crest factor was specifically increased to reflect real-life parameters of digital cinema sound tracks. Maximum peak SPL calculated using peak voltage during IEC short-term power test. Continuous power handling tested using IEC60268-1 noise signal for duration of 2 hours.
***Averaged in 500Hz-12kHz range, at -6dB.
Downloads
Christie Vive Audio Brochure
Jun 07, 2023 | PDF: 740 KB
This is the PDF product brochure that outlines key features, specifications and uses for the Christie Vive Audio speakers and amplifiers. Please refer to the information presented on the Christie website or speak to your Christie representative for the confirmation of installation-critical specifications and features.
Christie Vive Audio LS5S Specsheet
Apr 05, 2016 | PDF: 2.7 MB
This document outlines the detailed specifications for the Christie Vive Audio LS5S line source surround-sound loudspeakers.